Table of Contents
Advertisement
5. The following information is displayed:
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
* Disk to Remove
F1=Help
F5=Reset
F9=Shell
Press F4 to list the disk drive modules.
6. A list of disk drive modules is displayed.
If the disk drive module, or modules, that you want to remove is in the list, select
the module, or modules, from the list, then go to step 6 on page 150.
If any disk drive module that you want to remove is not in the list:
a. Run the Link Verification service aid (see the chapter about service aids in the
b. Check whether the SSA loop is broken.
c. If the SSA loop is broken, go to step 6d.
d. Check whether the SSA loop is broken only at the disk drive module that you
270
7133 Models D40 and T40 Service Guide
Remove a Disk from an SSA RAID Array
SSA RAID Manager
SSA RAID Array
Connection Address / Array Name
F2=Refresh
F6=Command
F10=Exit
User's Guide and Maintenance Information manual for your SSA adapter).
If the SSA loop is not broken, go to step 9 on page 151.
want to remove.
If the SSA loop is broken only at that position, go to step 9 on page 151.
If the SSA loop is broken somewhere else, close down the using system (see
the Installation and Service Guide for the using system), then go to step 9 on
page 151.
Entry Fields
ssa0
hdisk3
095231779F0737K
F3=Cancel
F4=List
F7=Edit
F8=Image
Enter=Do
+
Advertisement
Table of Contents
