Bypass Card Jumpers
Attention:
tools and procedures defined by your organization to protect such parts.
The base mode in which the bypass card operates is set by two jumpers. The default
setting is for Automatic mode. The mode can be changed by relocating the jumpers. For
instructions on how to remove a bypass card and change its mode, see "Bypass
(SNBC) Cards" on page 201.
Jumpers Set for Automatic Mode
1
SSA connectors
Figure 25. Bypass Card Jumpers Set for Automatic Mode
The bypass cards are electrostatic-discharge (ESD) sensitive. Use the
1 2 3
1 2 3
2
2
Jumpers
2
Chapter 1. Reference Information
1
1
45