Table of Contents
Advertisement
Step 3. (from step 2)
104
7133 Models D40 and T40 Service Guide
a. Disconnect both MAIN using-system power-control cables from connectors
J3 and J4 of the remote-power-on control unit.
b. Observe the power supply assemblies in the 7133.
Does at least one CHK/PWR-GOOD light show green?
NO
a. Reconnect the MAIN using-system power-control cables to the
remote-power-on control unit.
b. Go to step 4 on page 105.
YES
The remote-power-on control unit has not received a signal from the
using system.
a. Reconnect the MAIN using-system power-control cables to the
remote-power-on control unit.
b. Go to step 5 on page 106.
Advertisement
Table of Contents
