Table of Contents
Advertisement
Step 4. Replace parts in the reverse sequence.
142
7133 Models D40 and T40 Service Guide
e. Do the same actions with the latch 1 to unplug the disk-drive-status-light
flexible circuit from the controller card assembly.
f. Disconnect the support strap 3 from the front cover.
g. Remove the two locknuts 4 and, if present, the plastic cable shield 5 .
Do not lose the plastic cable shield.
h. Remove the front cover assembly.
Note: Ensure that the latches of the operator panel flexible circuit and the disk
drive status lights flexible circuit engage fully in the slots of the 7133
frame assembly.
Advertisement
Table of Contents
