Table of Contents
Advertisement
Step 16. (from step 13)
Step 17. (from step 16)
Step 18. (from step 13)
Step 19. (from step 12)
92
7133 Models D40 and T40 Service Guide
Are you servicing a 7133 Model T40 (deskside unit)?
NO
Go to step 17.
YES
Go to step 18.
The 7133 is in Standby mode. Press and release the 7133 Power switch.
Does the 7133 Power light come on, and stay on continuously?
NO
Go to step 18.
YES
Go to step 12 on page 90.
Does the 7133 have a Remote Power On Control feature?
NO
Switch on the 7133, and return to step 12 on page 90.
YES
Go to "MAP 2030: 7133 Models D40 and T40 – Remote Power On
Control Feature" on page 103.
Observe the ID display of the 7133 whose Check light is on.
Does the display show the word "POST" for longer than 10 seconds?
NO
Go to step 20 on page 93.
YES
a. Exchange the controller card assembly for a new one (see
"Controller Card Assembly" on page 199).
b. Go to "MAP 2410: 7133 Models D40 and T40 – Repair
Verification" on page 131 to verify the repair.
Advertisement
Table of Contents
