Communication Interfaces; Minislot Cards - Eaton 93E G2 100/100 User And Installation Manual

Table of Contents

Advertisement

Eaton 93E Generation 2 UPS 100-200 kVA
(380/400/415V)
6

Communication interfaces

This section describes the communication features of Eaton 93E UPS -
generation 2. For terminal wiring information, see Sections
the location of the customer interface panel and terminals, see Figure
6.1
The UPS is compatible with the following MiniSlot cards:
Gigabit Network Card (NETWORK-M2)
Enhances the capabilities and protection provided by the UPS by enabling
Web and SNMP based remote monitoring and e-mail alarms. The card also
enables shutdown of servers and migration of virtual machines through IPM
and IPP software. Supports 10/100 Mbit and Gigabit Ethernet.
Figure 31. Gigabit Network Card
Industrial Gateway Card (INDGW-M2)
This card has all the features and capabilities of the Gigabit Network Card.
In addition, it also provides direct integration of system level UPS information
(meters and status) to a Building Management System (BMS) using the
Modbus RTU and Modbus/TCP.
©
Eaton Corporation plc 2019. All rights reserved.

MiniSlot cards

Revision: 002
Document ID: P-164000848
User's and installation guide
4.3.3
5.2
and
. For
22
.
73 (118)

Advertisement

Table of Contents
loading

This manual is also suitable for:

93e g2 120/12093e g2 200/16093e g2 200/200

Table of Contents