Eaton 93E G2 100/100 User And Installation Manual page 16

Eaton 93E Generation 2 UPS 100-200 kVA
(380/400/415V)
Figure 1. Eaton 93E 100-200 kVA UPS
A single UPS operates independently to support an applied load from the
inverter, providing conditioned and uninterruptible AC power to the critical load
from the output of the module. During an outage, the inverter continues to
operate, supporting power to the load from the battery supply. If the unit requires
service, applied loads are transferred to the internal bypass either automatically
or manually. With the exception of an optional external battery cabinet, no other
cabinets or equipment are required for the single UPS to successfully support its
applied loads.
Note: Startup and operational checks must be performed by an authorized
Eaton Field Service Engineer or by other qualified service personnel
authorized by Eaton, or the terms specified in the Warranty (see Chapter
become void. This service is offered as part of the sales contract for the UPS.
Contact service in advance (usually a two-week notice is required) to reserve
a preferred startup date.
©
Eaton Corporation plc 2019. All rights reserved. Revision: 002 Document ID: P-164000848
User's and installation guide
10
)
16 (118)