Table of Contents
Advertisement
Eaton 93E Generation 2 UPS 100-200 kVA
(380/400/415V)
You can use the LCD and the push buttons to:
•
Look at a log of UPS events (alarms, notices, and commands), see Section
7.2.6
•
Monitor UPS operation, see Section
•
Set UPS parameters, see Section
•
Control UPS operation, see Sections
After approximately 10 minutes, the display screen darkens. To restore the
screen, press any push button once.
7.2.4
The UPS menu bar allows you to display data in the information area to help
you monitor and control the UPS operation.
Table 20: Display function menu map
Menu option
METERS
EVENTS
HISTORY
CONTROLS
SETUP
ESC (push button)
7.2.5
To select the Mimic screen from the Meters, Events, History, Controls, or Setup
screens, press the ESC push button on the current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a
real-time graphical representation of the operating status of the system.
©
Eaton Corporation plc 2019. All rights reserved.
Using the menu
Description
Displays performance meters for the system or critical load.
Displays the list of active system events.
Displays a historical log of system events.
Displays the System Control screen.
Allows you to set the date and time for the time stamp, the display
language, the unit name, and meter subscripts. Also allows you to
change the password, and view the firmware version numbers.
Returns to the main menu and the Mimic screen from the Meters,
Events, History, Controls, or Setup screens. Returns to the main
System Setup Level screen from a setup submenu.
The enter arrow acknowledges or executes a command, or saves a
setting.
The up and down arrows scroll through the screens and lists or
highlight settings.
The left and right arrows select or adjust settings displayed on the
screen.
Mimic screen
7.2.6
7.2.6
7.2.6
7.2.7
and
Revision: 002
Document ID: P-164000848
User's and installation guide
.
81 (118)
Advertisement
Table of Contents
