Eaton 93E G2 100/100 User And Installation Manual page 51

Eaton 93E Generation 2 UPS 100-200 kVA
(380/400/415V)
Figure 14. Removing the shipping brackets (front)
1
2
3
10. Attach the ramp to the front of the pallet
a)
b)
c)
©
Eaton Corporation plc 2019. All rights reserved.
Front door
Pallet
Shipping bracket
Locate the ramp (side panel with sloped support blocks from wood
container), ramp extension, and ramp brackets with M10 bolts.
Place the ramp against the front of the pallet.
Attach the ramp extension to the front of the ramp by inserting the
tabs on the extension into the slots at the bottom of the ramp.
4 Shipping bracket bolts
5 Shipping bracket bolts
Revision: 002 Document ID: P-164000848
User's and installation guide
51 (118)