Interfaces And Communication; Control Panel - Eaton 5PX Advanced User's Manual

4 Interfaces and communication

4.1 Control panel

The screen provides useful information about the UPS itself, load status, events, measurements and settings.
The LED bar ⑨ has been implemented to provide a quick visual reference of UPS status "at-a-glance".
Led indicator
The following table shows the indicator status and description :
Indicator Status
Green
On
On
Yellow
Flashing
Red
On
Static blue
Flashing blue
Led bar
Static red
Flashing red
614-40094-00
Description
The UPS is "On" and the load is protected.
The UPS is in battery mode and the load is protected.
The battery voltage is below the warning level.
The UPS has an active alarm or fault. See troubleshooting page for additional
information.
The UPS is "On" and the load is protected.
The UPS is on battery or the battery service age warning is reached.
The UPS has an active alarm or fault.
The UPS output has stopped due to a fault.
① Power ON indicator (green)
② On battery indicator (yellow)
③ Alarm Indicator (red)
④ Escape
⑤ Up
⑥ Down
⑦ Enter
⑧ On/Off button
⑨ Led bar
16