Eaton 93E G2 100/100 User And Installation Manual page 53

Eaton 93E Generation 2 UPS 100-200 kVA
(380/400/415V)
Figure 16. Removing the shipping brackets (back)
1
2
Do not stand directly in front of the pallet while unloading the cabinet. If
unloading instructions are not closely followed, the cabinet may cause serious
injury.
The UPS cabinet is heavy. Two persons are needed to safely roll the cabinet
down the ramp.
14. Slowly roll the cabinet toward the ramp edge. Be careful not to push the
cabinet too much or too fast since it may cause the cabinet to tip over.
15. Continue rolling the cabinet down the ramp until the cabinet is clear of
the ramp.
16. Roll the cabinet to its final installation location.
©
Eaton Corporation plc 2019. All rights reserved.
Pallet
Shipping bracket
3 Shipping bracket bolts
WARNING
Revision: 002 Document ID: P-164000848
User's and installation guide
53 (118)