Status - Thermo Scientific Sorvall LYNX 4000 Instruction Manual

Status

The upper part of the touchscreen displays the centrifuge status.
The remaining time is indicated while centrifugation is in progress. The progress bar shows in which
phase centrifugation is currently at.
Speed
Status:
Progress:
Temperature:
Speed:
Statuses that can be displayed:
Ready
Door open
Door blocked
Error
Canceled
Complete
Pretempering completed
No rotor
Idle
Initialization
Timeout
Thermo Scientific
In the Time mode, the remaining time for the centrifugation process is shown here. In
the Hold mode, the elapsed time is displayed.
The curve diagram is divided into the sections Accelerate, Centrifugation and
Deceleration.
The current temperature in the rotor chamber is shown here.
The current speed of the rotor is shown here.
Centrifugation can be started.
Centrifuge door is open
Not possible to open centrifuge door automatically.
An error has occurred.
Centrifugation has been halted manually.
Centrifugation has been successfully completed.
Pretempering has been successfully completed.
No rotor is being used in the centrifuge.
The centrifuge is in idle operation.
The centrifuge is being prepared for operation.
It was not possible to reach the target temperature for
pretempering in the defined time period.
3
Control Panel
Control Panel
Status
Progress
Temperature
Sorvall LYNX 4000 / 6000
21