Control and Configuration
In this section you can start and halt centrifugation. You can also define settings, such as for the
centrifugation programs. If you are not sure of the general use of a button you can use the tooltip
mode, which provides information about all of the operator control elements.
Start centrifugation:
Centrifugation can only
be started when a rotor
has been installed and
identified, when all
parameters are
acceptable and when the
centrifuge door is closed.
Configuration:
The configuration menu is
displayed when this button is
clicked. This button is not active
while centrifugation is in progress.
Thermo Scientific
Tooltip Mode:
Operator:
This button is used to activate the
In certain modes,
Tooltip mode. All functional
touching the
elements are de-activated with
operator name
this mode. When an element is
opens a window for
selected in the Tooltip mode a field
selecting other
options.
is displayed with information about
that particular element. If you
press the Tooltip button again, this
mode is canceled.
3
Control Panel
Control Panel
Open Door / Stop:
When centrifugation
starts, this button switches
to Stop.
When the rotor comes to a
complete
stop, this
button
Sorvall LYNX 4000 / 6000
23