Removing the Rotor
To remove the rotor, proceed as follows:
1. Open the centrifuge door.
2. Grab the rotor handle with on or both hands and push down on against the Auto-Lock button. At
the same time, pull the rotor directly upwards with both hands and remove it from the centrifuge
spindle. Make sure not to tilt the rotor while doing this.
Figure 14.
Turning Off the Centrifuge
Turn off the power supply switch located on right side (pull the switch handle towards the front of the
centrifuge).
Additional Features
Rotor Lid Holder
Figure 15.
Thermo Scientific
Holding the Rotor during Removal
Additional Features of the Sorvall LYNX 4000 / 6000
Rotor Landing Pad
4
Operation
Removing the Rotor
Sorvall LYNX 4000 / 6000
33