Precautions - Thermo Scientific Sorvall LYNX 4000 Instruction Manual

Precautions

A trained specialist can be a laboratory assistant or medical technologist.
Note In order to ensure safe operation of the Sorvall LYNX 4000 / 6000 centrifuge, general safety
regulations must be followed: Mind the accident prevention regulations in your country.
Note Not following these instruction can cause damage.
Thermo Scientific
WARNING
• Plug the centrifuge only into sockets which have been properly grounded.
• If a hazardous situation occurs, turn off the power supply to the centrifuge and leave
the area immediately.
The work environment should guarantee the following:
WARNING
• Maintain a radius of at least 30 cm around the centrifuge.
The clearance around the centrifuge is reduced, when the centrifuge is bolted down
(Optional Seismic Bolt-down Kit 75006500).
• Implementation of special measures which ensure that no one can approach the
centrifuge for longer than absolutely necessary while it is running.
The power supply must be interrupted in case of an emergency. Turn off the centrifuge at
the main switch. The mains plug must be freely accessible at all times. Pull out the power
supply plug or disconnect the power supply in an emergency.
In case of rotor failure the centrifuge can be damaged. The coolant can escape. Ventilate the
room well and leave it. Inform customer service.
P
Preface
Precautions
Sorvall LYNX 4000 / 6000 v