Thermo Scientific Sorvall LYNX 4000 Instruction Manual page 23

5. Place the wooden protection profiles under the rails.
Figure 4.
6. Use several people and other means in order to roll the centrifuge off the pallet.
Figure 5.
7. Once the centrifuge is in its final position screw the rubber feet entirely down.
First use your hand then the wrench to lower the feet.
The casters should be 5-15 mm off the ground.
Thermo Scientific
Support the rail with the wooden protection profiles for the installation.
CAUTION Do not push at the control panel. Due to the centrifuges weight it must be
controlled by two or more people when rolling of the pallet. Do not stand in front of the
centrifuge when rolling it down the ramp as it is very heavy and it may cause severe injury.
The centrifuge has four steering casters that must be parallel to the rails so the centrifuge
cannot roll of the pallet to the side.
Rolling the Centrifuge of the Pallet with two Persons
2
Before Use
Setting Up
Sorvall LYNX 4000 / 6000
13