2
Before Use
Mains Connection
Mains Connection
Main Power Switch
Figure 8.
1. Turn off the power supply switch located on right side (pull the switch handle towards the front of the
centrifuge).
2. Check whether the cable complies with the safety standards of your country.
3. Make sure that the voltage and frequency correspond to the figures on the rating plate.
4. Plug the centrifuge into grounded electrical sockets only.
Storage
• Before storing the centrifuge and the accessories it must be cleaned and if necessary disinfected and
decontaminated.
• Store the centrifuge in a clean, dust-free location.
• For safety, store the centrifuge on its rubber feet and not on its casters.
• Avoid storing the centrifuge indirect sunlight.
16
Sorvall LYNX 4000 / 6000
Mains Connection
Mains Plug
Thermo Scientific