Introduction; Figure 41: X330-28Gtx Switch Installed In A Standard 19-Inch Equipment Rack - Allied Telesis x330 Series Installation Manual

Chapter 5: Installing the x330-28GTX Switch in an Equipment Rack

Introduction

86
The x330-28GTX Switch comes with two brackets for installing the device
in a standard 19-inch equipment rack. Refer to Figure 41. The brackets
and screws are shown in Figure 28 on page 71.
Figure 41. x330-28GTX Switch Installed in a Standard 19-inch Equipment
Note
You can install the x330-28GTX Switch in an equipment rack using
the brackets that come with it or the RKMT-J13 equipment rack
brackets kit, which is sold separately. The kit lets you install the
switch with the front panel recessed 50mm (2 in.) from the front of
the equipment rack. Refer to "RKMT-J13 Equipment Rack Brackets
Kit" on page 74.
Rack