Preface - Allied Telesis x330 Series Installation Manual

Preface

This guide contains the hardware installation instructions for the x330
Series of Fanless Gigabit Layer 3 Access Switches. The instructions
explain how to install the x330-20GTX and x330-28GTX Switches in virtual
stacks with Virtual Chassis Stacking (VCStack™). VCStack lets you
manage multiple switches as a single unit and add redundancy to your
network topology by distributing functions across multiple devices. This
preface contains the following sections:
"Document Conventions" on page 16

"Contacting Allied Telesis" on page 17

Note
The x330-10GTX Switch is included in Chapter 1, "Overview" on
page 19. However, it does not support the VCStack feature.
For instructions on how to install x330 Switches as standalone units, refer
to the x330 Series Installation Guide for Standalone Switches.
15