Installing The Switch On A Table; Figure 33: Switch Installation On A Table; Figure 34: Unsupported Table Installations - Allied Telesis x330 Series Installation Manual

Chapter 3: Beginning the Installation

Installing the Switch on a Table

76
You can operate the switch on a table or desktop. Refer to Figure 33.
Figure 33. Switch Installation on a Table
The following guidelines are in addition to those in "Choosing a Site for the
Switch" on page 68:
Do not stack switches on a table.

Do not install the switch upside down on a table.

Do not install the switch vertically on a table.

Figure 34. Unsupported Table Installations
Warning
Switches should not be stacked on a table or desktop. They could
present a physical safety hazard should you move or replace
switches.  E91
Warning
The device is heavy. Use both hands to lift it. You might injure
yourself or damage the device if you drop it.  E94