Allied Telesis x330 Series Installation Manual page 106

Chapter 7: Displaying the Hardware Status and AlliedWare Plus Version Number
106
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.  E3
9. Repeat the procedures in this chapter on the remaining switches that
will be in the stack.
10. If there are no further switches, go to one of the following chapters:
Chapter 8, "Building Stacks with SFP+ Ports S1 and S2" on page

107
Chapter 9, "Building Stacks with Multi-Gigabit Copper Ports" on

page 117