Figure 20: Stack Trunks Of Multi-Gigabit Copper Ports For Three Switches; Figure 21: Stack Trunks Of Multi-Gigabit Copper Ports For Four Switches - Allied Telesis x330 Series Installation Manual
Fanless gigabit layer 3 access switch virtual chassis stacking
Hide thumbs
Also See for x330 Series:
- Installation manual (126 pages) ,
- Installation manual (172 pages)
Table of Contents
Advertisement
Chapter 2: Virtual Chassis Stacking
Crossover
48
Crossover
Figure 20. Stack Trunks of Multi-Gigabit Copper Ports for Three Switches
Figure 21. Stack Trunks of Multi-Gigabit Copper Ports for Four Switches
As with the SFP+ ports S1 and S2, the Multi-Gigabit copper ports support
the chain topology, where ports on the top and bottom switches are
unused. Refer to Figure 22 on page 49 for an example. This cable
topology is not recommended because it does not provide trunk link
redundancy.
Straight-through
Straight-through
Advertisement
Table of Contents
