Eb+ Soft Docking - Haldex DIAG++ Operator's Manual

Operator's Guide
How to check if EB+ Soft Docking is installed
Step 1:
Turn 'on' the power to the EB+ 4.0.
Open DIAG++, select ECU (configuration).
Step 2:
Read ECU configuration then select ECU Edit
configuration.
Step 3:
Select Aux tab.
2022
DIAG++ DIAG++
Step 4:
Select CAN Bus tab.
Step 5:
Observe the EB+ Soft Docking tick box.
No tick = EB+ Soft Docking not installed
Tick = EB+ Soft Docking installed
Innovative Vehicle Solutions 79