Haldex DIAG++ Operator's Manual page 70

DIAG++ Operator's Guide
Load Transfer Control
An associated GPI or / and Super AUX can be connected to a button or a switch or both.
A short activation (< 5 seconds) is a manoeuvring request and will use the available Load Transfer hardware to
temporary minimize the wheelbase. 'Load Target' is changed to the 'Traction Overload Limit' (Extra Lift Axle Data).
Manoeuvring is cancelled when 'Traction Speed Limit' (Extra Lift Axle Data) is reached or by a further short activa-
tion of the switch.
Note: Load Transfer is effectively the opposite to traction assist.
70 Innovative Vehicle Solutions 2022