Table of Contents
Advertisement
10
Technical Data
Fig. 10.1: Technical Data
10.1 Ambient Conditions
At a nominal voltage of 100V or 200V, a tolerance of +10% / -5% applies.
Version 03/2010, Rev. 1.7 of 27/01/2012
Translation of the original operating manual
Manufacturer:
Type:
Electr. Connection:
Protection class:
IP Code:
Connected load (kVA):
Power consumption (kW):
Max. current consumption (A):
Performance data
Max. speed (rpm):
Max. capacity (ml):
Max. gravitational field (x g):
Max. kin. energy (Nm):
Other parameters
Time range:
Temperature range:
Heater (Special equipment):
Storage locations:
Physical data
Height (mm):
Height with opened lid (mm) :
Width (mm):
Depth (mm):
Weight (kg):
EMC as per EN 61326:
Noise level (dBA):
The figures are valid for an ambient temperature of
+23°C
2 °C and a nominal voltage
temperature is < +4 °C and depends on the rotor type, speed, and
ambient temperature.
Allowable ambient temperature +5°C to +35°C.
Max. relative humidity of air 80% up to 31°C with a linear
decrease to 67% relative humidity of air at 35°C.
Special equipment Heater: In order to reach the stated final
temperature, the rotor and buckets must be preheated by running
at approximately 1,500 rpm. The maximum rotor temperature that
can actually be reached is 40-60°C, depending on the rotor and
speed.
2-16KC
Technical Data
S I G M A Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
2-16KC
see name plate
I
20
1,05
0,72
4.0 (at 220-240 V / 50-60 Hz)
8.0 (at 120 V / 60 Hz)
15 300
400
21 918
9 962
short run, continuous run,
10 sec – 9 h 59 min
-20 to +40°C
-20 to +60°C
50
320
700
550
570
60
Class B
< 65 (at max. speed)
10 % . The minimum
53
Advertisement
Table of Contents
