Ecg Installation Procedure - GE Venue Fit Technical Publication

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
4.) using your thumb, push down the latch and pull out the ECG module..
ECG
8-2-14-5 Installation Procedure
1) Install the ECG module into its bracket.
2.) connect the USB cable and the ECG leads
Perform the checks listed in
Figure 8-57 Remove ECG module
Table 8-36 - Peripherals section
Chapter 8 - Replacement Procedures
VENUE FIT™ SERVICE MANUAL
8-33