GE Venue Fit Technical Publication page 252

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
Automatic installation process runs. At the end of the process, the following message appears:
5.) Tap OK.
Select Exit and Reboot. Wait until the INFORMATION dialog box appears:
Figure 8-66 Venue Fit™ Installation Process- Information Dialog Box
6.) Disconnect the SW installation media and tap OK in the message box.
In the Confirmation dialog box that appears, tap Yes to continue the reboot.:
Figure 8-67 Venue Fit™ Installation Process- Confirmation Dialog Box
7.) Tap Yes to continue the reboot.
8-42
Figure 8-65 Software Deployment completed Message
Chapter 8 - Replacement Procedures
VENUE FIT™ SERVICE MANUAL