Peripheral/Accessory Interface Panel; Emi Protection - GE Venue Fit Technical Publication

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
3-4-3-4

Peripheral/Accessory Interface Panel

The figure below shows a view of the Venue Fit™ ultrasound unit rear panel showing external
peripheral/accessory connectors.
Figure 3-6 View of the Venue™ Peripheral/Accessory Interface Panel
1 Ethernet LAN connector — 1000 Base-TX Ethernet IEEE 802.3 (1.5kV insulation)
2 USB 3.0 connector x3 (not insulated)
3 HDMI connector (not insulated)
3-4-3-5

EMI Protection

The Venue Fit™ has been designed to minimize the effects of Electro-Magnetic Interference (EMI).
Many of the covers, shields, and screws are provided primarily to protect the Venue Fit™ from image
artifacts caused by this interference. For this reason, it is imperative that all covers and hardware are
installed and secured before the Venue Fit™ is put into operation.
See EMI Limitations
3-14
2
1
3
for more information about EMI protection.
Chapter 3 - System Setup
VENUE FIT™ SERVICE MANUAL