Product Description; Overview Of The Venue Fit™ Ultrasound Scanner; How To Turn The Scanner On And Off; How To Check For Hardware/Software Version And Installed Options - GE Venue Fit Technical Publication

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
1-2-4

Product Description

1-2-4-1 Overview of the Venue Fit™ Ultrasound Scanner
The Venue Fit™ is a compact, phased, linear array ultrasound imaging scanner.
Weighing only 6 Kgs (13.22 lbs), each system is extremely versatile and, depending upon the installed
software, can be used for a variety of applications.
The system provides image generation in 2D, Color Doppler, M-Mode, Color M-Mode, PW and Tissue
Velocity imaging.
The fully digital architecture of the Venue Fit™ system allows optimal usage of all scanning modes and
probe types throughout the full spectrum of operating frequencies.
Signal flows from the Probe Connectors to the Front End, and then over to the Back End Processor and
finally to the Touch Panel and peripherals.
System configuration is stored on the Venue Fit™.
All necessary software is loaded from the SSD drive on power up.
1-2-4-2

How to Turn the Scanner ON and OFF

• To turn the scanner ON
• To turn the scanner OFF
1-2-4-3

How to Check for Hardware/Software Version and Installed Options

• To verify the hardware versions on the boards:
Refer to HW Version tab.
• To check the software versions on local software on the boards:
Refer to Software Version.
• To check for installed options:
Refer to .
1-4
see:
see:
Chapter 1 - Introduction
VENUE FIT™ SERVICE MANUAL