GE Venue Fit Technical Publication page 264

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
8.) The system will reboot automatically and the Venue Fit SW reload window will be displayed.
9.) Select Reload Venue Fit SW. The software reload process will start.
10.)Once the process is complete, The Venue Fit SW reload window will be displayed again.
11.)Select Reboot Venue Fit Scanner.
12.)The system will reboot.
13.)Continue with Venue Fit EZ Config Setup Wizard:
•
Perform the checks listed in
8-54
Figure 8-92 Venue Fit SW Reload
Run Venue Fit™ EZ Config Setup Wizard
Chapter 8 - Replacement Procedures
Table 8-36 - Software installation section
VENUE FIT™ SERVICE MANUAL