Windows Safe Mode; Where To Find User Information - Tektronix DSA8300 Service Manual

Operating Information

Windows Safe Mode

Where to Find User Information

DSA8300 Digital Serial Analyzer and Modules Service Manual
CAUTION.
Keep the bottom of the instrument clear of obstructions to allow proper
cooling.
If the instrument is turned off before the operating system boots, or if you've
installed a third-party product with a driver that is not compatible with the
instrument start-up, Windows will open in Safe mode. The touch screen will not
operate; you must install the standard-accessory keyboard and mouse. Information
about installing these accessories is in the DSA8300 Quick Start User Manual,
Tektronix part number 071-2897-00.
When you have removed any barrier to Windows start-up, you can reboot. If
the instrument no longer boots to Safe mode, you can remove the keyboard and
mouse if desired.
CAUTION. Be sure to read all safety information, warnings, and cautions in the
user manuals that relate to the information you use there.
Some topics of interest when servicing the product are listed in the following
table. The manuals are available at www.tektronix.com/manuals.
Location of user topics
Manual
DSA8300 Quick Start User Manual, Tektronix
part number 071-2897-00
Your sample-module user manual. (Module
manual part numbers are provided in the
preface of this manual.)
Topic
Environmental requirements (site
considerations, operating requirements,
rackmount requirements)
Maximum configuration
Connecting peripherals such as monitor,
printer, keyboard, and mouse
Powering the instrument on and off
System hard drive rebuild
Diagram of rear-panel connectors
Installing sampling modules
Installing probes and other accessories to
the sampling modules
1–1