Transporting The Header - MacDon R85 Operator's Manual

5.11 Transporting the Header

Refer to your windrower operator's manual for transporting headers when attached to the windrower.
IMPORTANT:
Lights are factory assembled to meet road travel lighting
requirements with windrower in ENGINE-FORWARD
transport mode. If transporting header with header
forward, light assemblies MUST be reversed.
Ensure the reflector assemblies are properly orientated
to suit the mode of transporting the header. The amber
deflector MUST face the direction of travel.
For procedure on changing the reflector orientation, refer
to
5.12 Lights, page 64.
169457
OPERATION
Figure 5.65: Windrower Direction
A - Engine-Forward
C - Amber Light
63
B - Cab-Forward
Revision G