Table of Contents
Advertisement
6.
The third menu option is "Duration (sec)". As the name implies, the
amount of time the gas will be read by the analyzer before performing the calcu-
lations must be entered, in seconds. A typical value for this is 120 seconds (two
minutes). It may be better to enter a longer duration if the sample system creates a
condition where the analyzer takes longer to stabilize to changes in gas concentra-
tion. To change the value, type in the desired number using the keypad, then press
Enter. To back out without changing the value, just press the Backspace (BKSP)
key.
Appendix A | A-5
Advertisement
Table of Contents
