Table of Contents
Advertisement
Network
The Network Key enables the Model 5100 HD Analyzer to communicate over an
Ethernet network to view data, diagnostics, or backing up/restoring the analyzer
configuration.
NETWORK
Menu for the Network key.
Network
Enables or disables the Ethernet network. Select Enable or Disable.
DHCP
Dynamic Host Configuration Protocol (DHCP). Choose Enable to open the com-
munication protocol or Close to disable it.
IP Address
Defines the network of the analyzer and is a required parameter. Enter the IP ad-
dress for your network.
Subnet
Defines the subnet to which the analyzer belongs. Analyzers in the same subnet
can communicate locally without going through a router (Gateway). Enter your
network subnet.
Gateway
This function defines the Gateway IP address for the network to allow local net-
work traffic to be sent to another network. Enter the Gateway address.
Enable
NETWORK*
Disable
Enable
DHCP*
Disable
IP ADDRESS*
SUBNET*
GATEWAY*
|
User Interface
4-13
Advertisement
Table of Contents
