CompAir 5280D.1.IAC Operator's Handbook Manual page 28

CompAir UK Ltd
5280D Compressor Publication 98407.1440
Page 25
9.6 STOPPING & STARTING
The compressor will automatically STOP if the temperature rise for any compression stage reaches a
pre-set value, determined for safe, reliable operation, or should the oil pressure fall below a minimum
pre-set pressure.
The compressor can be STOPPED manually by depressing the EMERGENCY STOP button.
When the compressor has stopped by fault indicating too high air temperature, low oil pressure or
Emergency Stop, the starter fault circuit must be reset before starting again.
In the case of EMERGENCY STOP, the latch button must also be reset by turning clockwise and fully
extending the button.
1440.doc