CompAir 5280D.1.IAC Operator's Handbook Manual page 103

2.1.2 Parameter modification
a) Parameter modification without password protection
•
Within the entered menu, select the parameter to be changed by scrolling through the menu with the up
and down arrow-button (step 1)
•
Push the enter-button and the parameter value will start blinking (step 2)
•
Change the blinking value with the "+" or "-" button (step 3)
•
Confirm with the enter-button (step 4)
Step 1
b) Parameter modification with password protection
The parameters of several menus are protected by a password. With the following procedure those
parameter values can be changed.
•
Within the entered menu, select the parameter to be changed by scrolling through the menu with the up
and down arrow-button (step 1)
•
Push the enter-button and "CODE" will appear on the display at the same time "000" starts blinking
•
Set with the "+" and "-" minus-push button the appropriate code for the selected menu (step 2)
•
Confirm the selected code by pushing the enter-button again (step 3)
98155.1015
App 408 Customer PET controller installation guide & user's manual
Bar
PSI
Step 3
Bar
PSI
Step 2
C
F
Step 2 and step 4
C
F
Step 1 and Step 3
Page 7
App 408C