Commissioning of the KNX function via BJE DCA SmartTouch 10 (from
Notice
The parameter is available only when parameter "Use information start page"
has been activated.
Primary function
The primary function is triggered by touching the display with 3 or more fingers.
Use primary function
■
Options:
The checkbox is used to specify whether the primary function is to be activated or deactivated.
Icon for primary function
■
Options:
The parameter is used to specify the icon for the primary function.
Object type
■
Options:
The parameter is used to specify the object type.
Reaction to pressing
■
Options:
The parameter is used to specify the reaction behaviour to pressing.
Reaction to release
■
Options:
The parameter is used to specify the reaction behaviour to release.
Product manual 2CKA001473B5342
Activated
Deactivated
<Icon>
1 bit
1-byte value [0-100%]
1-byte value [0-255%]
Number of scene [1-64]
RTC operating mode [1 byte]
Value 1
Value 2
Alternating value 1/value 2
Inactive
Value 1
Value 2
Alternating value 1/value 2
Inactive
ETS5)
│91