Table of Contents
Advertisement
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
10.8.11 Enable 1-bit communication object "Disable"
Options:
There is the option of temporarily disabling the function via an additional communication object
"Disable".
Product manual 2CKA001473B5342
KNX control elements and application parameters
Deactivated
Activated
Control element "Fan switch"
│149
Advertisement
Table of Contents
