Ports And Services For Supporting The Main Functionality - Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual

2.5.1

Ports and services for supporting the main functionality

To support the main functionalities of the device, communication via specific ports and services
must be possible in your local network. Contact your network administrator to set up, if
necessary, the appropriate port sharing.
Attention!
Enabling the port increases the risk of cyber attacks.
–
–
In the following table the TCP and UDP services listed on the device are summarized:
Port
5222
5269
5060/TCP
5060/UDP
5061/TCP
50602/UDP
2222/TCP
2224/TCP
8277/TCP
Random
Port/UDP
Product manual 2CKA001473B5342
Assign only necessary enabling.
Regularly check which ports are enabled for which purpose.
Service Purpose
TCP Service for XMPP client.
TCP Xmpp server
Port 5060/TCP is used by SIP Server Flexisip/0.5.0 (sofia-sip-
nta/2.0).
SIP (Session Initiation Protocol) is a communication protocol for
SIP the introduction of communication sessions between systems.
The protocol is used mostly in IP Telephony networks / systems
to set up, control, and finish sessions between two or more
systems.
Port 5060/UPD is used by SIP Server Flexisip/0.5.0 (sofia-sip-
SIP
nta/2.0).
Port 5061/TCP is used by SIP Server Flexisip/0.5.0 (sofia-sip-
SIP-TLS nta/2.0). The use of SSL encryption makes the encryption of
communication sessions possible.
SIP Is used by SIP server STUn.
Private Is used for b2bsip.
Private Is used for b2bsip.
Is used for internal process communication of safety storage
Private components. This port is limited only for local access by
iptables.
Private The random UDP port is used for the communication of b2bsip.
Safety
│21