Product Overview - Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual

4

Product Overview

Fig. 1: Product overview
The Busch-SmartTouch
communication system and the display and operation of standard KNX and free@home
functions (See "Overview of KNX functions" on page 28 or Chapter 8.2.1 "Parameter settings of
panel" on page 52). It has a capacitive touchdisplay with a resolution of 1280 x 800 (IPS
display).
The touch panel is linked with both bus systems, the Busch-Installationsbus
Busch-free@home
the power for the device is supplied via the Busch-free@home
means that at least one Busch-Welcome
®
free@home System Access Point or one additional power supply is to be provided to ensure
the power supply for the touch panel.
If the touch panel connected with the Busch-free@home
configuration of the System Access Point is taken over (e.g. the number of the control
elements). If the touch panel is connected with the Busch-Welcome
made via the rotary switch on the rear side of the panel. It is also possible to operate the touch
panel without a connection to the Busch-Welcome
communication system is then made via WLAN. This means that an additional power supply is
to be provided to ensure the power supply for the touch panel.
Product manual 2CKA001473B5342
®
serves as indoor video station for the Busch-Welcome
® and the Busch-Welcome
® central control system or alternatively oneBusch-
® bus. The audio/video signals are transmitted and
®
or Busch-Welcome
®
System Access Point, the
®
bus, the configuration is
®
bus. The connection to the door
Product Overview
®
door
®
KNX or alternately
®
bus. This
│25