10.3
"Dimmer" control element
10.3.1
Name of the control element
Options:
Naming the dimmer control element, e.g. name of the lamp that is to be dimmed.
The length of the name is limited to 36 characters.
10.3.2
Name of room (otional)
Options:
Naming a room in which the control element Split Unit Control is located.
The length of the name is limited to 36 characters.
10.3.3
Size of the button
Options:
The parameter is used to specify whether the control element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.3.4
Function icon
Options:
Specifies an icon for the function of the button.
10.3.5
Icon type
Options:
The parameter is used to set whether a standard icon or a self-selected icon is displayed.
10.3.6
Icon for On / icon for Off
Options:
The parameter is used to set the icon that is to be displayed when the light is switched on or off.
–
Icon for On: The selected icon is displayed when the light is switched on.
–
Icon for Off: The selected icon is displayed when the light is switched off.
Product manual 2CKA001473B5342
KNX control elements and application parameters
<Name>
<Name>
1x1
1x2
2x2
<Icon>
Standard
User-defined
Icon for On
Icon for Off
"Dimmer" control element
│126