Table of Contents
Advertisement
–
14-byte text: Makes it possible to send any text. The following supplementary parameter is
available:
Sent value 1 / value 2 [max- 14 characters]:
Options:
The length of the text is limited to 14 characters.
10.1.7
Status control element (icon/text) is operated via a separate object
Options:
An additional 1-bit communication object "Status" is enabled via the parameter.
When the object has been enabled, the status display of the control element indicates the
current status of the object. The feedback object can ensure that the correct status is always
displayed.
If an actuator has a separate feedback object, this additional object can check whether the
actuator has switched. For this the feedback object of the actuator must be connected with the
feedback object of the button via a common group address (Action).
If the status display is not activated via a feedback object, the control element always changes
to the other status when actuated.
Product manual 2CKA001473B5342
KNX control elements and application parameters
<Text>
No
Yes
"Switch" control element
│117
Advertisement
Table of Contents
