Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual page 314

Value display elements / value sending elements (basic version)
– Value display elements are used to display values as text or graphic information. They
cannot be operated (exception is the value slider), but serve for the display of values.
– Value sending elements can be used to display values in different formats and to send them
to other devices.
Control
Value or status display
Graphics display
Value sending element
(value slider)
Product manual 2CKA001473B5342
Status Function
The "Value or status display" version can
display values and texts which are sent from a
temperature sensor for example.
There are no direct control elements here!
The "Graphics display" version can display
values graphically, which are sent from a
temperature sensor. The values are also
displayed as a number.
With graphic display elements you can also
choose between a wind rose and a round
instrument. This must have been allocated
correspondingly in the commissioning software
®
of the Busch-SmartTouch
There are no direct control elements here!
Value sending elements can be used to display
values in different formats and to send them to
other devices.
With "Value slider" the slider can be used to
change values. The changed values are then
sent.
Text displays can be made here.
In this case, a corresponding text can be
displayed at the different slider positions.
Operation
.
│314