Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual page 225

Sending value when input 1 < input 2:
Options:
The parameter is used to specify which output object is sent when input 1 is logically
smaller than input 2.
Telegram is sent at:
Options:
A telegram is sent when the selected condition is met.
Cyclic sending of output:
Options:
The parameter is used to specify whether the output telegram is sent in cycles.
– Deactivated: No additional parameters available.
– Activated: The following parameter appears:
Cycle time:
Options:
The parameter is used to specify the cycle time (hh:mm:ss).
– Status converter: This function is used to convert an input value into a 14-byte text or divide
it into several 1-bit telegrams. The following parameters are displayed:
Type of converter:
Options:
See the explanation above.
– 1 bit -> text: A 1-bit value is converted into text. The following parameter appears:
Number of inputs:
Options:
The parameter is used to set the number of available inputs. The following parameter
appears:
Using value xxxx:
Options:
The parameter is used to specify whether the signal is used for the conversion into text.
– Deactivated: No additional parameters available.
– Activated: The following parameter appears:
Text for value xxxx:
Product manual 2CKA001473B5342
KNX control elements and application parameters
Setting options from 0 - 255
Change output
Output 1 is larger than input 2
Output 1 is smaller than input 2
Deactivated
Activated
Setting options from 00:00:01 - 00:30:00
1 bit -> text
1 byte -> text
1 byte -> 8x1 bit
2 byte -> 16x1 bit
Setting options from 1 - 4
Deactivated
Activated
Application "Logical functions"
│225