Busch-Jaeger Busch-SmartTouch ST/U10.1.11-811 Product Manual page 85

Commissioning of the KNX function via BJE DCA SmartTouch 10 (from
Notice
The parameter is only available if the parameter "Switch off the display when the
room is dark" is activated.
Proximity sensor
Use approximation for switching on the display
■
Options:
When the checkbox is activated, a proximity is used as switch-on criteria for the display.
Sensitivity of the proximity function
■
Options:
The parameter us used to specify the sensitivity of the proximity function (1 = near, 3 = max.
distance).
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" is activated.
Use 1-bit output object of proximity function
■
Options:
When the checkbox is activated, a 1-bit output object of the proximity function is used.
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" is activated.
Switch-on value
■
Options:
The parameter is used to set the switch-on value of the proximity sensor.
Notice
The parameter is only available if the parameter "Use approximation to switch on
the display" and the "Use 1-bit output object of proximity function" are activated.
Product manual 2CKA001473B5342
Activated
Deactivated
1
2
3
Activated
Deactivated
Off
On
ETS5)
│85