Table of Contents
Advertisement
10.8.9
Display status
Options:
The parameter is used to specify which status texts are displayed for the individual switching
levels.
–
User-defined: User-defined texts are displayed for the individual switching levels. The
following supplementary parameters are available:
Text Off:
Options:
The parameter is used to specify the text that is to be displayed when the fan is switched off.
The length of the text is limited to 15 characters.
Note
The following parameter is only available when parameter "Deactivation of
switch-off option" is set on "No".
Text level x (1 - 8):
Options:
The parameter is used to specify the text that is sent for the respective level. The length of
the text is limited to 15 characters.
Note
How many "Text level x" parameters are available depends on the setting
of the "Number of levels" parameter.
Text beyond reach:
Options:
The parameter is used to specify the text that is displayed when the user-defined texts are
too long. The length of the text is limited to 15 characters.
–
Standard: Standard texts are displayed for the individual switching levels. The following
supplementary parameter is available:
Text beyond reach:
Options:
The parameter is used to specify the text that is displayed when the standard texts are too
long. The length of the text is limited to 15 characters.
–
No: No texts are displayed.
10.8.10 Status control element (icon) is controlled by a separate object
Options:
An additional 1-bit communication object "Status" is enabled via the parameter.
Product manual 2CKA001473B5342
KNX control elements and application parameters
User-defined
Standard
No
<Text for "Off">
<Text for switching level>
<Text for "beyond reach">
<Text for "beyond reach">
Deactivated
Activated
Control element "Fan switch"
│148
Advertisement
Table of Contents
