10.7.7
Display actual temperature
Options:
The parameter is used to specify whether the current temperature is displayed.
10.7.8
Display
Options:
The parameter is used to specify the setpoint that is shown in the display.
10.7.9
Hide temperature unit
Options:
The parameter is used to specify whether the temperature unit is displayed.
10.7.10 Unit of temperature
Options:
The parameter is used to specify the unit with which the temperature is displayed.
10.7.11 Adjusting the temperature unit via object
Options:
The parameter is used to specify whether the adjustment of the temperature unit is made via an
object.
10.7.12 Heating/cooling switchover
Options:
The parameter is used to specify whether the RTC control element can be switched over
between heating and cooling mode.
10.7.13 Fan coil control during heating mode
Options:
Product manual 2CKA001473B5342
KNX control elements and application parameters
Deactivated
Activated
Current setpoint
Relative set value
Disabled
Activated
°C
°F
Disabled
Activated
Deactivated
Activated
Deactivated
Activated
Control element "RTC control element"
│142