Table of Contents
Advertisement
10.24.87 Setpoint settings — Setpoint setting via communication object (DPT 9.001)
Options:
This parameter is used to specify whether the setpoint setting is made via communication
objects.
10.24.88 Setpoint settings — Display
Options:
The display can indicate either the absolute or relative setpoint value.
–
Current setpoint: On devices with a display, the setpoint is shown as an absolute
temperature, e.g. 21.0°C.
–
Relative setpoint: On devices with display, the setpoint is indicated as a relative value, e.g. -
5°C to +5°C.
10.24.89 Setpoint settings - Hide temperature unit
Options:
This parameter is used to specify whether the temperature unit is displayed.
10.24.90 Setpoint settings — Send current setpoint
Options:
The current setpoint value can be sent to the bus either cyclically and after a change, or only
after a change.
10.24.91 Setpoint settings - Cyclic sending of the current setpoint
Options:
This parameter is used to specify the amount of time that will elapse before the current setpoint
is automatically transmitted.
Notice
This parameter is only available when the "Send current setpoint" is set on
"Cyclic and during change".
Product manual 2CKA001473B5342
KNX control elements and application parameters
No
For comfort, standby, Eco
For comfort, standby, Eco, building protection
Absolute setpoint
Relative set value
Deactivated
Activated
Cyclic and during change
Only for change
00:05:00 - 18:12:15
Application "Internal RTC"
│260
Advertisement
Table of Contents
