Table of Contents
Advertisement
The parameter is used to specify whether the fan coil fan is activated during heating mode.
10.7.14 Fan coil control during cooling mode
Options:
The parameter is used to specify whether the fan coil fan is activated during cooling mode.
10.7.15 Step size of setpoint adjustment
Options:
The parameter is used to specify the step size for manual setpoint adjustment.
10.7.16 Setpoint adjustment master/slave via communication object
Options:
The parameter is used to specify how the master/slave setpoint adjustment is carried out via the
communication object.
10.7.17 Enable 1-bit communication object "Disable"
Options:
There is the option of temporarily disabling the function via an additional communication object
"Disable".
Product manual 2CKA001473B5342
KNX control elements and application parameters
Deactivated
Activated
0.1 °C
0.2 °C
0.5 °C
1.0 °C
1-byte counter value
Absolute temperature value
Relative temperature value
Deactivated
Activated
Control element "RTC control element"
│143
Advertisement
Table of Contents
