Table of Contents
Advertisement
10.6
"Blind" control element
10.6.1
Name of the control element
Options:
Naming the blind switch control element, e.g. name of the window whose blind is to be
switched.
The length of the name is limited to 36 characters.
10.6.2
Name of room (otional)
Options:
Naming a room in which the control element Split Unit Control is located.
The length of the name is limited to 36 characters.
10.6.3
Function icon
Options:
Specifies an icon for the function of the button.
10.6.4
Size of the button
Options:
The parameter is used to specify whether the control element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.6.5
Using 1-byte positioning
Options:
The parameter is used to specify whether the 1-byte positioning is used.
Display value in control element:
Options:
The parameter is used to specify whether the value is displayed in the control element.
Product manual 2CKA001473B5342
KNX control elements and application parameters
<Name>
<Name>
<Icon>
1x1
1x2
2x2
Deactivated
Activated
Deactivated
Activated
"Blind" control element
│137
Advertisement
Table of Contents
